Home Sewing: All Types
Johnson Ruffler Sewing Machine HA1 Gathers up to 6 to 1 Ratio, Head, Motor, Light, Foot Control & 4" Drapery Guide Plate, No Dress Plate - REDUCED $30

Our Price: $299.00
Click Here to Order

Twice as much gather ratio as ruffling attachments, even on heavier fabrics such as velveteen which attachments will not gather. Up To 900 Stitches Per Minute. All-Metal Construction. Can Ruffle 6 Feet Into 1 Foot. Ruffles 1 Layer Or 1 Layer To Flat Fabric. Convert To Straight Stitch Without Ruffle. 4 inch header guide plate included. Portable Ruffling Machine for commercial use. Light Assembly Installation Included FREE. Includes Wiring & Foot Control & Light. The standard plate (sometimes called a curtain or drapery plate) fastens with screws to the base of the machine. The material that is to be ruffled goes over the top the plate and the material that stays flat (called the flat panel) to which the ruffle is attached goes under the plate. Because of the location of the screws, the ruffles can only be sewed close to the edge of the flat panel . On the other hand, the optional dress plate does not attach to the base but is mounted on long rods that hinge from holes in the upright part of the machine. This gives much more room for the flat material and allows ruffles to be attached farther from the edge of the flat panel as would be necessary in sewing ruffles in tiers to a dress. If you buy the optional dress plate you also get the standard plate. The user can install either plate on the machine depending on which is required. ( the standard plate does have the advantage of being a bit more rigid than the dress plate, so if you are not doing ruffles far from the edge you would probably want to use the standard plate. ) The machine can also sew ruffles without attaching to a flat panel and sew straight stitch without ruffling.

Note: Every effort is made to show  current prices. However, the official price of the partner merchant, after you "Click Here to Order", may have recently changed (lower or higher). If this is the case, please accept my apologies (or congratulations) depending on the circumstance. Have a creative day! ~ FRANK